CG FC200 ECU Programmer Full Version with New Adapters Set 6HP & 8HP / MSV90 / N55 / N20 / B48/ B58 and MPC5XX Adapter for EDC16/ ME9.0

Product Description

CG FC200 ECU Programmer Full Version with New Adapters Set 6HP & 8HP / MSV90 / N55 / N20 / B48/ B58 and MPC5XX Adapter for EDC16/ ME9.0 etc

Highlights:

1. Protect Original Car Parts

More than 98% of ECUs support BENCH mode and OBD mode, no need to open the cover and punch holes to protect the original car.  

2. Intelligent Recognition

The "identification" function can help users better diagnose whether the ECU module is communicating and check whether the wiring is wrong. If the ECU module can communicate without damage and the wiring is correct, the recognition can be successful, and the chip information, hardware information and firmware information can be read out.

3.Module Clone

Supports ECU data reading and writing and module cloning, no synchronization matching, no online programming, data sub-regional burning, automatic verification, and maximum protection of chips and modules.

4. ISN Read and Write

Supports engine computer ISN code acquisition for all BMW series (including Mini), which is convenient for key matching and anti-theft maintenance.

5.VIN modification

Solve the problem of double VIN or VIN mismatch of vehicles, which is convenient for vehicle maintenance.

6. Data Processing

Support engine computer data analysis and modification for Audi/Seat/Skoda/Volkswagen models;

Support the shutdown of Bosch MED/EDC17 series engine computer anti-theft system;

Support the TPROT off function of Bosch VAG MEDC17 series, BMW/Mini MEVD17/EDC17 series, Hyundai/Kia EDC17/MED(G)17 series.

7. FC200 not only support BMW ECU but also support over three thousands of ECUs like KTAG, Kess, Dimsport etc.

Check FC200 Support ECU List

8. Multi-Language: English, French and Simplified Chinese

Spanish, Polish, Turkish and Traditional Chinese need to pay $130.

9. Full Version with All License Activated. 

After 1 Year Free Update, It will cost $200/year for FC200 Update Service

10. With New Adapters Set No Need Disassembly in Package:

Adapters Including: 6HP & 8HP, MSV90, N55, N20, B48/B58, B38, 271KE Adaper, 271DE Adapter.

(With this adapter set, you won't need the old B48/B58 cable anymore).

11. With FC200 MPC5XX Adapter in Package, Support BOSCH MPC5xx platform mode ECU: MED9.1, MED9.5, MED9.5.10, ME9.0, EDC16CP31, EDC16CP35, EDC16C2, EDC16C8

FC200 Latest Update Information:

FC200 V1.1.7.0  Registered Version (2023.11.24)

CG FC200 Software Free Download

1.Add Volvo Electric Equipment ECU: MB279700-9500, MB279700-9801, MB279700-9811

2.Add Audi ECU: Simos8.4x, Simos12.x

3.New Hyundai ECU/TCU: SIM2K-240_ ECU, SIM2K-341_ TCU

4.Fix issues with some ECU cloning failures: MED17.3.1/MED17.7.2/MED117.7.3/MED17.5.5 and general Exx series, etc

5.Fix the issue of some universal ECU recognition failures: E78/E39/E39A/E80, etc

6.Lovol added ECU: EDC17CV43

7.BMW adds ECU: MEVD17.8.4

8.Added ECU for PFlash verification algorithm: MSV90, SID807EVO, EMS3110, SIM2K-240_ ECU, SIM2K-341_ TCU, Simos12. x, Simos8.4

9.Add and modify ECU for VIN: CPGDSH1.21.6, CPGDSH2.2x. x

10.Optimize the PFlash verification algorithm for DQ380

11.Fix some bugs and optimize software performance

Functions of Each Adapter:

1. MSV90 Adapter:

This adapter supports ISN reading and writing and data backup and recovery of BMW MSV90

2. N20 Adapter:

This adapter supports ISN reading and writing, VIN modification and data reading and writing functions of the N20 and N13 of the F series chassis of BMW

3. B48/B58 Adapter:

This adapter supports ISN reading and data reading and writing functions of BMW models: MG1CS003, MG1CS024 and MG1CS201.

4. 271KE Adapter & 271DE Adapter:

These two adapters support the data backup and recovery functions of Mercedes-Benz SIM 271KE and SIM 271DE

5. 6HP & 8HP Adapter:

The adapter is used for the data backup and recovery function of the 6HP and 8HP EGS of BMW models.

FC200-MPC5XX-P02-M230102 Adapter for BOSCH MPC5xx Read/Write Data on Bench

Description:

CG FC200-MPC5XX-P02-M230102 adapter can be used for MPC5X series clone without opening cover.

Product Functions:

Supported ECU Models: ME9.0, MED9.1, MED9.5.10, EDC16C2, EDC16CB, EDC16CP31, EDC16CP35. More models are being upgraded.

Product Features:

Adaptation without disassembly

Stable and safe

Function extension

Data loss prevention 

Real-time monitoring

Solid connection

Package List:

1pc x CGDI FC200 Host

1pc x OBD Cable

1pc x Jumper

1pc x USB Cable

6pcs x G-type Adapter Cable

3pcs x F-type Adapter Cable

6pcs x E-type Adapter Cable

6pcs x D-type Adapter Cable

6pcs x C-type Adapter Cable

6pcs x B-type Adapter Cable

FC200 Adapter Set

including: 6HP & 8HP, MSV90, N55, N20, B48/B58, B38, 271KE Adaper, 271DE Adapter

1pc x CG FC200-MPC5XX-P02-M230102 Adapter

CG FC200 ECU Programmer Full Version with New Adapters Set 6HP & 8HP / MSV90 / N55 / N20 / B48/ B58 and MPC5XX Adapter