2023 FoxFlash Master Version Super Strong ECU TCU Clone Chip Tuning Tool Support Checksum with WinOLS 4.70 Damos2020 Get Free Gifts

Product Description

FoxFlash Master Version Super Strong ECU TCU Clone and Chip Tuning Tool Free Update Support VR Reading and Auto Checksum

FoxFlash is a powerful solution developed for professional chiptuners, calibration engineers and control unit (ECU and TCU) repair shops. foxFlash includes multi-method control unit programming for tuning ability,this tool from tuner design ,so you can get many of them support. Since the FoxFlash is so much more than just an ECU programming tool, it simply can't be compared to any traditional flash tool. Despite other tools how good, this is being good tools for read/write operations, we supply many important features, both on the developer side as in daily use. That is why we recommend FoxFlash.

FoxFlash Master Version Highlights:

1. Master Version, Full protocols open 

2. VR read online work (some ecu need use our VR system, tool auto connect to ousr server donload file)

3. ECU can be restore to original if your ecu was damage or meet some bad tuning , use our tool can restore to original

4. Free Update Online, No Subscription, No Annual Fee, Two Years Warranty. Latest Update Detail Check Here.

5. Tool can online work (some of ecu and functions can offline)

6. Auto checksum 

7. Excellent Online Technical Support

8. Help desk and tuner account 

9. ECU and TCU connect wires with pdf 

10. Support MEDC17 free clone service (most of others tool need patch the files after read out ,but ours is free)

11. Software can be download on official website: https://www.dfb-technology.com/

12. With the Latest firmware and updates. Use better quality BOM and PCB. More stable, full proof, and reliable.

13. FoxFlash ECU TCU Car List, or check driver list on dfb-technology, it is much easier to search than pdf

14. Language: Italian, English, Dutch, French, Spanish, Polish, Portuguese, Romanian, Czech, Turkish

15. Please Check the FoxFlash Installation Instruction

16. New Arrival OTB 1.0 Expansion Adapter is suitable for foxFlash extended application engine and transmission computers, and is also suitable for ACM and DCM computer modules.

17. Buy FoxFlash Get Free Gifts:

1) 2 Pairs of Gloves

2) Toyota Lexus BDM/JTAG Solder-Free Adapter (SO664-B)

FoxFlash Operation Modes:

1. OBD mode: (read the data from Diagnostic port ,you need remove the ecu or tcu from car or open the ecu box , just read everything from car, we also support obd vr read, we supply original file from our server, you can direct obd vr read it )

2. BENCH mode: we also call it service mode,  you can use this mode clone or backup all ecu data, read the internal flash and external flash and eeprom data, so you can save a lot of money for clone ecu and tcu , you also can  clone tcu and chiptuning with this mode.

3. Jtag mode: open the ecu , and wire it or use ours adapter connect ecu ways,some of denso ecu always need use this mode for read and write .

4. Boot mode: open the ecu and always can backup everything , read the flash and eeprom , you can save some ecu cause your obd write failed, or some others reason cause the ecu dead.

5. Full system : you can read and write by pinout for most of ecu and tcu

6. BDM mode: some of the ecu need read and write in bdm mode ,open the ecu and use ours adapter connect it 

FoxFlash Support types:

CAR

TRUCK

MOTORBIKE

TRACTOR

BOAT

Additional TCU package available for Automatic Transmissions.

FoxFlash Compatible Operating Systems:

Windows 7

Windows 8/8.1

Windows 10

Windows 11

Recommended minimum requirements:

CPU > 2.5 GHz (Intel i5, i7)

RAM > 4GB

64 bits

FoxFlash Software Display:

FoxFlash Function List:

ECU clone 

TCU clone

Chiptuning

Stage1-stage4

Vmax off

Adblue and SCR off

DPF  OFF

Flaps OFF

popbangs 

gearbox data to adjust LC

sport display

immo off

dpf off

dtc off

GPF/OPF Removal

DPF Removal

EGR Removal

DTC Removal

ADBlue Removal

HOT Start Fix

IMMO Removal

Readiness Calibration

Flaps / Swirl Removal

TVA Removal

Sport Displays Calibration

Cold Start Noise Reduction

Kickdown Deactivation

StartStop Disable

MAF Removal

Speed Limiter Removal

Torque Monitoring Disable

Burbles Activation

Popcorn Activation

EVAP Removal

Exhaust Flap Removal

SAP Removal

AGS Removal

BMS/BPCM

Lambda/O2 Removal

Launch Control

OBD Reading Protection

Boost Sensor Calibration

LC, AL and NLS for MED9.1

Checksum Fix

vmax, swirl off

restoring ECU or TCU factory setting service 

VIN fix (EEPROM support checksum , so you can easy change VIN then write back )

Support Winols damaos

As we all know, winols damaos and A2L is very expensive ,we supply these to ours customer for free, so you can get it for chitpuning, dtc off, and so on.

Supported Control Units

We believe a control units list can be considered as a more safe approach to correctly target the overall tuning procedure due to the fact that a lot of brands offer identical car models & versions that share different Control Unit types.

Please note that foxFlash can help you select the right protocol with its auto-detection feature when identifying on most control units.

Support Vehicle Types: 

AUTO

CAMION

TRATTORI

MOTO

MARINE

BIKE

CAMBI AUTOMATICI

Multiple connection possibilities:

EXAMPLES OF CONNECTION IN FULL SYSTEM BOSCH / DELCO / DELPHI / DENSO / MARELLI / SIEMENS / CONTINENTAL / TEMIC

BENCH CONNECTION

BDM CONNECTION

JTAG CONNECTION

BOOT MODE CONNECTION

FoxFlash Update Information:

December 26, 2023

foxFlash 1.3.9 Update:

OBD VR file update:

MED17.5.25 DCM6.2A DCM6.2V DCM6.2C

PCR2.1 SIMOS18.1 EDC17C74

foxFlash Manager Update:

FW update to D086

Notifications add

Checksum fix:

Marelli 9DF

Marelli MJD602.M1 - 603.S3

Bosch   EDC17CP44

September 25, 2023

Special customized version foxFlash Manager 1.3.6 verison

The foxFlash team is proud to announce the 1.3.6 management software update, through which we will

1: Improve all VR databases.

2: Personal equipment customization.

3: Customize your brand tuning logo into the tool software.

4: Special personal beta version customization and testing.

5: Private tool VR database, exclusive VR model database.

6:Special personal VR data needs to be opened on the official website and contact us through the online chat tool to assist you in updating the individual VR file database.

Update method: Open foxFlash Manager software and it will automatically push the update. During this period, keep the USB connection of the device until the download is completed and reinstalled, you will see a new function.

September 14, 2023

Update for checksum fix for mcu TC1766 TC1793 TC1797 TC1724F TC1767

foxFlash is now able to perform the following operations:

software caculate checksum

On the following ECU reference:

 Audi Bosch MED17.5 TC1766 

Audi Bosch MED17.5.5 TC1766

Audi Bosch MED17.5.20 TC1766 

Audi Temic VL381F TC1766

BMW Bosch EDC17C76 TC1793

Honda Bosch EDC17CP50 TC1797 

Hyundai Bosch ME17.9.21.1 TC1724F 

Jaguar Bosch MED17.9.7 TC1797 

Kia Bosch ME17.9.21.1 TC1724F 

Land Rover Bosch MED17.9.7 TC1797 

Mercedes Bosch EDC17CP01 TC1796 

Mercedes Bosch MED17.7.7 TC1793 

Mercedes Bosch MED17.7.7 TC1797 

Renault Bosch EDC17CP58 TC1767 

Seat Bosch MED17.5 TC1766

Seat Bosch MED17.5.5 TC1766 

Seat Bosch MED17.5.20 TC1766

Skoda Bosch MED17.5 TC1766 

Skoda Bosch MED17.5 TC1766

Skoda Bosch MED17.5.5 TC1766

Skoda Bosch MED17.5.20 TC1766 

Toyota Bosch EDC17C60 TC1793

Volkswagen (VW) Bosch ME17.5.6 TC1766 

Volkswagen (VW) Bosch MED17.5 TC1766 

Volkswagen (VW) Bosch MED17.5.5 TC1766

Volkswagen (VW) Bosch MED17.5.20 TC1766 

September 06, 2023 update

BMW MINI BENCH BOOT READ&WRITE   

BMW Install Bosch MEVD17.2.7 Bench read/write

foxFlash is now able to perform the following operations:

Bench Read

Bench Write

Boot    Read

Boot    Write

On the following ECU reference:

Bosch MEVD17.2.7

BMW        Bosch MEVD17.2.7     BENCH BOOT 

Citroen     Bosch MEVD17.2.7     BENCH BOOT 

Mini          Bosch MEVD17.2.7     BENCH BOOT 

Peugeot   Bosch MEVD17.2.7     BENCH BOOT 

Update method: Click the download button in foxFlash manager till all file donwloading is completed.

May 23, 2023 update

Bench/Boot protocol for Isuzu EDC17C83.

May can't get any better as we release a new exclusive protocol today! In this update, you'll find the BENCH protocol for Isuzu EDC17C83.

Supported Control Units & Vehicles

ECU:

Bosch EDC17C83 TC1793

Supported Vehicles:

Isuzu Dmax 2017-2022 1.9D 164cv

Isuzu Dmax Rodeo 2017-2022 1.9D 164cv

Isuzu M21 2017-2022 1.9D 123cv

BENCH  read is real.

R/W time:   ~6 minutes at first programming, then ~ 30s.

ATTENTION: Some of the latest vehicles might have a secure gateway. 

Update method: Run the foxFlash Manager software, and click the download button till all is done.

Mar.14, 2023

FoxFlash is now able to perform the following operations:

Boot Read

Boot Write

On the following ECU reference:

Continental GPEC2 GPEC3 GPEC4LM GPEC2A 

Chrysler 200 Continental GPEC3         BOOT

Chrysler 300 mk2 Continental GPEC2A BOOT

Chrysler Aspen Continental GPEC2A BOOT

Chrysler Grand VojagerContinental GPEC2A   BOOT

Chrysler Town & CountryContinental GPEC2A BOOT

Dodge Avenger Continental GPEC2A BOOT

Dodge ChallengerContinental              GPEC2A        BOOT

Dodge Charger Continental GPEC2A BOOT

Dodge Dart Continental GPEC3         BOOT

Dodge Durango Continental GPEC2A BOOT

Fiat Tipo Continental GPEC4LM         BOOT

Fiat Toro Continental GPEC3                 BOOT

Fiat Toro Continental GPEC4LM         BOOT

Fiat 500X Continental GPEC3         BOOT

Fiat 500X Continental GPEC4LM BOOT

JeepCherokee Continental GPEC3                 BOOT

JeepCherokee Continental GPEC4                 BOOT

JeepCompass Continental GPEC3         BOOT

JeepCherokee Continental GPEC4LM                 BOOT

JeepGladiator Continental GPEC2A         BOOT

JeepGran Commander Continental GPEC4         BOOT

JeepRenegadeContinental GPEC3                 BOOT

JeepWrangler Continental GPEC4         BOOT

Update method: Run the foxFlash Manager software, and click the download button till all is done

Mar.3, 2023

FoxFlash ECU Tool Ducati Update: install Bosch ME17.9.21 can easy Read and Write now.

FoxFlash is now able to perform the following operations:

Bench Read

Bench Write

Boot    Read

Boot    Write

On the following ECU:

Bosch ME17.9.21

Vehicles concerned:

Ducati 1.198 150hp

Support BENCH and BOOT option

Update method: Run the foxFlash Manager software, and click the download button till all is done.

Feb.25, 2023

FoxFlash ECU Tool Update Protocols for Porsche PDK, Easy to read and write Porsche PDK gearbox now.

BOOT

Porsche           911.2              Siemens            PDK4000

Porsche           918                 Siemens            PDK3000

Porsche           918                 Siemens            PDK4000

Porsche           Boxster 718     Siemens           PDK3000

Porsche           Boxster 981     Siemens           PDK4000

Porsche           Carrera 991     Siemens           PDK3000

Porsche           Carrera 991     Siemens           PDK4000

Porsche           Cayman           Siemens           PDK4000

Porsche           Macan             Siemens           PDK3000

Porsche           Macan             Siemens           PDK4000

Porsche           Panamera        Siemens           PDK3000

Porsche           Panamera        Siemens           PDK4000

Reading & Writing Time

Read: 12 minutes and 36 seconds

Write: 6 minutes and 18 seconds

How to update FoxFlash ECU Tool with latest version?:

Run the foxFlash manager, click the donwload button till everything done. a

January 27, 2023

FoxFlash is now able to perform the Toyota Denso Gen1 (76F00xx) OBD read/write

FoxFlash is now able to perform the following operations:

OBD Read

OBD Write

On the following ECU reference:

Denso Gen1 (76F00xx)

Hino 4.0 VVT-i 147ch

Lexus/Toyota 2.5 205ch

Lexus 200H (1.8 E-CVT) 99ch

Lexus 220d 177ch

Lexus 250 (GSE20) 200ch

Lexus 300 (3.0 V6) 204ch

Lexus 330 (3.3 V6) 230ch

Lexus 350 (3.5i V6) 275/300ch

Lexus 400h (3.3i V6) 272ch

Lexus 430 290ch

Lexus 450h (3.5i V6) 292/299ch

Lexus 460h (4.6 V8) 247ch

Lexus 600h (5.0 V8) 394ch

Toyota 1.0 (1KR-DE) 64ch

Toyota 1.3 VVT-i 87/100ch

Toyota 1.6 VVT-i 132ch

Toyota 1.8 VVT-i HSD/TS 99/129/133ch

Toyota 2.0 (1AZFE) 145ch

Toyota 2.0 D4-D 116/126ch

Toyota 2.0 DOHC 16v 156ch

Toyota 2.0i 150ch

Toyota 2.2 D4-D 136/150/177ch

Toyota 2.4 (2AZFE) 160ch

Toyota 2.5 205ch

Toyota 2.5 D4-D 101/125/144/150ch

Toyota 2.7i 161/188ch

Toyota 3.0 D4-D 172ch

Toyota 3.5 (2GRFE) 270ch

Toyota 3.5i V6 266ch

Toyota 4.0 V6 239/249/260/273ch

Toyota 4.3 VVT-i 300ch

Toyota 4.5 D4-D 272ch

Toyota 4.5 V8 D4-D 198ch

Toyota 4.6i VVT-i D-45 314ch

Toyota 4.7 V8 280/288ch

Toyota 5.0 VVT-i 295ch

Toyota 5.7i VVT-i D-45 286ch

Lexus GS 300

Lexus GS 350

Lexus IS-F

Toyota Prius

Toyota RAV 4

Toyota Sequoia

Toyota Tacoma

Toyota Tundra

Toyota Verso

Toyota Auris

Toyota Auris

Toyota Avensis

Toyota Camry

Toyota Corolla (Verso)

Toyota Crown

Toyota Dyna

Toyota Estima

Toyota FJ Cruiser

Toyota Fortuner

Toyota Hilux

Toyota Land Cruiser

Toyota Mark X

Toyota Optimo

ECU UPDATE New Protocols for Bentley Skoda (BOSCH )

Today we added multiple protocols for Bentley, Skoda, Honda, Volvo, etc. More info on supported ECUs and cars can be found below.

SUPPORTED CONTROL UNITS & VEHICLES

BENCH /BOOT/OBD

BOSCH

BAIC Bosch ME17.8.8 TC1728: Senova x25 1.5 VTI (2016), Senova X35 1.5 VTI (2016) , BJ20 1.5 VTI (2016)(BOOT)

Honda Bosch ME17.9.55 TC1724: City/Jazz/BRIO/FIT 1.2L i-VTEC (2014)(BOOT)

Mahindra Bosch EDC17C53 TC1767: XUV500 2.2 CRD (2014)(BENCH BOOT)

Bentley Bosch MG1CS163 TC298: Continental GT W12 6.0 (2018)(BENCH)

Volvo Bosch EDC16C34 MPC562: V70/S80 1.6D (2010)(OBD BENCH JTAG)

Skoda Bosch MED17.1.27: Fabia 1.0 TSI (2017)(OBD BENCH BOOT)

Bentley Bosch MED17.1.62: Bentayga W12 6.0 (2016)(BENCH BOOT)

BMW MSV90 Protocols BOOT Mode

This time it is for BMW cars with Siemens MSV90 TC1796 ECU. More info on supported cars can be found below.

SUPPORTED CONTROL UNITS & VEHICLES

BOOT

SIEMENS

MSV90 TC1796

CARS:

BMW 5 Series F10 – 530i N53B30A/N52B30B

BMW 5 Series F11 – 530i N53B30A/N52B30B

BMW 7 Series F01 – 730Li N52B30A/N52B30B

BMW 7 Series F02 – 730Li N52B30A/N52B30B

BMW X3 Series F25 – 28i xDrive N52B30A/N52B30B

Delphi DCM6.2AP DCM6.2A DCM6.2C DCM6.2V 

FoxFlash is now able to perform the following operations:

DCM6.2A/C/V

OBD Read

OBD Write

JTAG_BOOT

DCM6.2APJTAG_BOOTOn the following ECU reference:

Hyundai

Audi

Citroen

Fiat

Kia

MAN

Peugeot

VW

Toyota

Ssangyong

January 26, 2023

FoxFlash Can Support AUDI VW Group TCU DQ250C/E/F OBD virtual read/write-BENCH Read&Write

FoxFlash is now able to perform the following operations:

OBD Virtual Read

OBD Write

BENCH Read

BENCH Write

On the following TCUs:

Temic DQ250C

Temic DQ250E

Temic DQ250F

Vehicles concerned:

AUDI/SKODA/VAG 2.0 TSI/TFSI

AUDI/SKODA/VAG 2.0 TDI CR

January 20, 2023

– BENCH MODE BY PROCESSOR INFINEON TRICORE TC1782

With this update you will be able to fully read and write the following ECUs directly

From pinout without having to open them:

– VAG GROUP VW-AUDI-SEAT-SKODA: MED17.5.21, MED17.5.25

– FORD: MED17.0.7

– NISSAN: EDC17 C84

– RENAULT: ME17.9.20, EDC17 C84

– TOYOTA: MED17.9.52, EDC17 C47

January 16, 2023

EXTRACT PASSWORD FROM FILE 

– NEW DRIVERS TO EXTRACT PASSWORDS FROM FILES

New utilities useful for extracting the password by loading a Tricore processor file.

As of now, the software will also save the tricore password locally for each Tricore processor reading.

FULL SYSTEM FOR TCU TEMIC 6T50 OPEL, CHEVROLET

– Complete reading and writing of Micro,

– Complete reading and writing of EEPROM,

– Cloning

– RIVERGIN function

FoxFlash Package Includes:

Hardware:

1pc x Master machine 

1pc x Fox bench box

1pc x USB cable 

1pc x Power adapter

1pc x Fox box store over 10 adpaters 

1pc x Jtag and bdm cables

1pc x Pen 

1pc x Notebook

1pc x Suitcase

1pc x Function cable for boot, bench, kline links .

1pc x Truck OBD cable

1pc x Car OBD cable

1pc x Paper box 

1pc x Install guide 

Software:

1pc x  Main software

1pc x  Technical Support

1pc x  Login account for software and tools

1pc x  PDF pacakges for connecting ecu and tcu

1pc x Join facebook group for support 

1pc x Online chat support for use

Extra pacakge according to users request after the user get the tool.

1pc x Tuner account

1pc x Helpdesk

1pc x WinOLS damaos, A2L