Searing-iron Tool

Searing-iron Tool

Character

• Multi-functional Soldering Searing-iron Tool that can be used alone or replacing other tip
• Ideal for soldering wire, iron, jewelry, cutting plastic, or heat shrinking plastic, etc
• Filling butane gas for repeatable use
• With flame resizing feature

Fill the Gas

• Make sure the switch is in the “OFF” position before filling, please choose high-quality gas
• Filled up about 10 seconds, please wait for several minutes to use
• If the end send the hissing sound after filling the gas, use the tip press intake slightly, it will disappear

Light the fire

• Push the switch on the ON position, you will hear the hissing sound
• Close the tip with the lighter, make the Searing-iron tip heaten continuously
• Resize the flame, ON indicates large flame, OFF indicates small flame
• The flame temperature is up to 1300℃, please be careful and turn off the switch after usage
• Please pay more attention to wait the flame is completely extinguished, do operation when iron objects turns red, note that too large flame will affect the iron tip life
• The length of flame is about 15-25mm

Caution

• Please replace the tip after cooling down, or replace in advance
• Please do not touch the working iron tip, because the temperature is high and hot
  
• The control knob can adjust the volume and temperature of gas, usually place it in the middle
• Please store it after cooling, do not put it in the high temperature or direct sunlight
• Please put in a safe place to avoid children using it
• It is necessary to clean the tip frequently, because more or less residual impurities may be left on the tip, it will get a cleaning effect to push the tip on the gas outlet
• Do not attempt to disassemble or repair at any case
• Fill Capacity: 8mL
• Flame Temperature: 1300℃, Searing-iron Temperature: 4500℃
• Material: Plastic
• Fuel: Pure Butane

If have any problems,please feel free to contact us to this email address: ecupop@gmail.com