BMW M35080 Chip
Description
- The M35080 Eeprom is fitted in all new BMW Vehicles from mid 2000??. Also including Opel, Vauxhall, Range Rover/Sport, Discovery etc.
- These Eeproms have been specifically designed to stop tampering, therefore the data
- stored will only increment, they will not decrement.
- We supply software for programming such Eeproms with the correct value, the
- software also programs the data from the old Eeprom to the new in order to keep
- original setting correct..
- If programming the Dashboard that holds the M35080 Eeprom, you also need to
- program the Headlamp Control Unit and EWS. (Programming the EWS will also
- program the Ignition Key too, including all other keys from the same vehicle)
- Please note that these new M35080 eeproms (Supplied 2008) have been fixed by the manufacturer, that is they cannot be erased without specialist equipment.
- If your using a programmer other than a CDH unit, then your programmer is copying
- the Incremental registers too.
- The first 32 bits of Eeprom address &h0 - &h1F are protected from being lowered.
- If using a Programmer other than CDH??s, then once you have copied the original data from the old Eeprom, erase the first two lines of address &h0 - &h1F with all 00??s within the saved file.
- Then program the new Eeprom supplied by CDH with the new data (Having 00??s on
- the first two lines).
- Now use your dashboard programmer to program the required value.
If have any problems,please feel free to contact us to this email address:ecupop@gmail.com
